產品簡介
關鍵詞：SFP,SFP+,ethernet,power,rohs,supply,Fiber,Fibre,
Description:
The F433M17413 of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated single data link over single mode optical fiber. The high-speed laser diode and photo diode are provided as a light source and a detector, respectively. An EEPROM contained the detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFP MSA, SONET/SDH standards, Class 1 laser products, EN60825, and EN60950.
關鍵詞：Checker,Fiber,Optical,SFP,SFP+,Tools,
Description:
Light Source Hub is a handy tool and instrument to provide you several different wavelengths in the same time to test the fiber equipment in the optical network and FTTx
construction. Light Source Hub is ideal for field or laboratory testing of optical communication system at 1310 nm / 1550nm / CWDM 1270 nm ~ 1610 nm ( 20 nm spans ) for all CWDM testing , as
well as 1490 nm for FTTx testing by changing interchangeable SFP module. Light Source Hub features zero warm up, superb productivity and is easy to use with box size and rugged design.
Internally there is also a specifically designed power circuit included; the APC ( Auto Power Control ) circuit provides steady power which avoids
unstable laser output power. By selecting Power Control Switch you can easily change the Optical Output Power into -3 dBm / 0 dBm / +3 dBm.
And LD output power could be obtained three levels by adjusting power switch. The LD output signal can be switched CW or Pulse Mode 270 Hz / 2KHz Modulated Mode to simulate signal transmission.
Features:
Box-size design and needless to pre-warm-up time.
SFP Plug-In Module design with LC or SC connector and it is very easy and flexible to change any wavelength for applications.
High stability optical output power and three Levels -3 dBm, 0 dBm, + 3dBm LD Output Power.
關鍵詞：Fiber,Fibre,SFP,SFP+,ethernet,power,rohs,supply,
Description
The F433S17415 of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated single data link over single mode optical fiber. The high-speed laser diode and photo diode are provided as a light source and a detector, respectively. An EEPROM contained the detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFP MSA, SONET/SDH standards, Class 1 laser products, EN60825, and EN60950.
Feartures:
RoHS Compliant
Operation Temperature: 0~70℃
1550nm uncooled DFB LD
1310 receiver
關鍵詞：Fiber,Fibre,SFP,SFP+,ethernet,power,rohs,supply,
Description
The F431S17450 of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated single data link over single mode optical fiber. The high-speed laser diode and photo diode are provided as a light source and a detector, respectively. An EEPROM contained the detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFP MSA, SONET/SDH standards, Class 1 laser products, EN60825, and EN60950.
Feartures:
RoHS Compliant
Operation Temperature: 0~70℃
1550nm uncooled FPLD
1310 receiver
20km link distance
關鍵詞：CWDM,Fiber,Fibre,RoHS,SFP,SFP+,ethern,
Description:
The F413L174XX of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated duplex data link over single mode optical fiber. The high-speed laser diode and APD are provided as a light source and a detector, respectively. There are eight central wavelengths available at present: 1470nm, 1490nm, 1510nm, 1530nm, 1550nm, 1570nm, 1590nm and 1610nm. An EEPROM contained the detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFP MSA, SONET/SDH standards, Class 1 laser products, EN60825, and EN60950.
Features:
RoHS Compliant
關鍵詞：CWDM,DDM,Fiber,Fibre,Optic,SFP,SFP+,
Description:
The F413L174XX of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated duplex data link over single mode optical fiber. The high-speed laser diode and APD are provided as a light source and a detector, respectively. There are eight central wavelengths available at present: 1470nm, 1490nm, 1510nm, 1530nm, 1550nm, 1570nm, 1590nm and 1610nm. An EEPROM contained the detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFP MSA, SONET/SDH standards, Class 1 laser products, EN60825, and EN60950.
Features:
RoHS Compliant
關鍵詞：Fiber,Fibre,SFP,SFP+,laser,point,power,supply,
Description
The F434S27451-D20 of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated single data link over single mode optical fiber. The high-speed laser diode and photo diode are provided as a light source and a detector, respectively. An EEPROM contained the detailed product information and digital diagnostics function for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFP MSA, SONET/SDH standards, Class 1 laser products, EN60825, and EN60950.
Features
RoHA Compliant
Operation Temperature: -20~85℃
1510nm uncooled DFB LD
1570nm receiver
With DDM Function
Hot Pluggable
Metal enclosure, low EMI
Single 3.3V power supply
關鍵詞：Checker,Fiber,HUB,Optical,SFP,SFP+,Tools,
1.Description Power Meter Hub is a handy tool and instrument to detect and measure 8 CH several different wavelengths output power in the same time to test the fiber equipment in the optical network and FTTx construction. Power Meter Hub is ideal to measure 8 CH different wavelengths for field or laboratory testing of optical communication system at 850 nm / 1300 nm / 1310 nm / 1550 nm / CWDM 1270 nm ~ 1610 nm ( 20 nm spans ) for all CWDM testing , as well as 1490 nm for FTTx and by changing interchangeable SFP module. Power Meter Hub features zero warm up and is easy to use with box size and rugged design. Internally there is a specifically designed smart circuit included to detect the optical power. By connecting the USB to the PC the real input power figure can easily be read the higher sensitivity figures via USB interface. 2 Features Box-size design and needlessto pre-warm-up time.Receiver designed as SFP Plug-In Module SC connector. High sensitivity for measuring 8 CH different wavelength optical powers. USB interface and visual input power figures shown in PC. 3 Application Maintenance CATV / Telecom / FTTH fiber optical network. Standard laboratories applications. Passive components fabrications. Optical fiber network traffic monitoring systems.
關鍵詞：ethernet,laser,Fiber,Fibre,RoHS,SFP,SFP+,
Description:
The F413S17450 of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated duplex data link over single mode optical fiber. The high-speed laser diode and photo diode are provided as a light source and a detector, respectively. An EEPROM contained the detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFP MSA, SONET/SDH standards, Class 1 laser products, EN60825, and EN60950.
關鍵詞：Ethernet,Fiber,Gigabit,OC,RoHS,SFP,SFP+,
Description:
The F433I17431-16 of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated single data link over single mode optical fiber. The high-speed laser diode and photo diode are provided as a light source and a detector, respectively. An EEPROM contained the detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFP MSA,SONET/SDH standards, Class 1 laser products, EN60825, and EN60950.
Feartures:
RoHS Compliant
關鍵詞：Fiber,Fibre,RoHS,SFP,SFP+,ethernet,laser,
Description:
The F413S17431 of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated duplex data link over single mode optical fiber. The high-speed laser diode and photo diode are provided as a light source and a detector, respectively. An EEPROM contained the detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFP MSA, SONET/SDH standards, Class 1 laser products, EN60825, and EN60950.
關鍵詞：Fiber,Fibre,SFP,SFP+,ethernet,power,rohs,supply,
Description
The F433M17415 of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated single data link over single mode optical fiber. The high-speed laser diode and photo diode are provided as a light source and a detector, respectively. An EEPROM contained the detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFP MSA, SONET/SDH standards, Class 1 laser products, EN60825, and EN60950.
關鍵詞：power,rohs,supply,Fiber,Fibre,SFP,SFP+,ethernet,
Description:
The F433L17413 of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated single data link over single mode optical fiber. The high-speed laser diode and photo diode are provided as a light source and a detector, respectively. An EEPROM contained the detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFP MSA, SONET/SDH standards, Class 1 laser products, EN60825, and EN60950.
Feartures:
關鍵詞：Fiber,Fibre,SFP,SFP+,ethernet,power,rohs,supply,
Description
The F433L17415 of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated single data link over single mode optical fiber. The high-speed laser diode and photo diode are provided as a light source and a detector, respectively. An EEPROM contained the detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFP MSA, SONET/SDH standards, Class 1 laser products, EN60825, and EN60950.
關鍵詞：DDM,Fiber,Fibre,RoHS,SFP,SFP+,ethern,
Description:
The F418S17413-D of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated duplex data link over single mode optical fiber. The high-speed laser diode and photo diode are provided as a light source and a detector, respectively. An EEPROM contained the detailed product information and digital diagnostics function for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFP MSA, IEEE and SONET/SDH standards, Class 1 laser products, EN60825, and EN60950.
Features:
關鍵詞：CWDM,Fiber,Fibre,RoHS,SFP,SFP+,ethernet,
Description:
The F413S174XX of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated duplex data link over single mode optical fiber. The high-speed laser diode and PD are provided as a light source and a detector, respectively. There are 18 central wavelengths available at present: 1270nm, 1290nm,
關鍵詞：Fiber,Fibre,SFP,SFP+,ethernet,power,rohs,supply,
Description
The F433S17415-16 of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated single data link over single mode optical fiber. The high-speed laser diode and photo diode are provided as a light source and a detector, respectively. An EEPROM contained the detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFP MSA, SONET/SDH standards, Class 1 laser products, EN60825, and EN60950.
Feartures:
RoHS Compliant
Operation Temperature: 0~70℃
1550nm uncooled DFB LD
1310 receiver
關鍵詞：Fiber,Fibre,SFP,SFP+,ethernet,power,rohs,supply,
Description:
The F433I17431 of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated single data link over single mode optical fiber. The high-speed laser diode and photo diode are provided as a light source and a detector, respectively. An EEPROM contained the detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFP MSA, SONET/SDH standards, Class 1 laser products, EN60825, and EN60950.
Feartures:
RoHS Compliant
關鍵詞：Checker,Fiber,Optical,SFP,SFP+,Tools,可攜式光源,
1.1 Description
Light Source is a handy tool and instrument to provide you several different wavelengths to test the fiber equipment in the optical network and FTTx construction. Light Source is ideal for field or laboratory testing of optical communication system at 850 nm / 1300 nm for datacom testing, 1310 nm / 1550 nm / CWDM 1270 nm ~ 1610 nm ( 20 nm spans ) for all WDM testing , as well as 1490 nm for FTTx testing by changing interchangeable SFP module. Light Source features zero warm up, superb productivity and is easy to use with pocket-size and rugged and handy design.
With LC / SC patch cord , Light Source can be used for all the most widespread fiber interfaces such as LC / ST / SC / FC connector. It is suitable to test both Singlemode and Multimode cables.
Internally there is also a specifically designed power circuit included; the APC ( Auto Power Control)circuit provides steady power which avoids unstable laser output when the battery is low.
The LD output signal can be switched CW or Pulse Mode 270 Hz / 2 KHz Modulated Mode to simulate signal transmission. There is a dust proof cap which will prevent dust from getting into the inside of the LD connector. The cap also helps evade incidental exposure of the laser directly into your eyes.
關鍵詞：Fiber,Optical,SFP,SFP+,Tools,檢光器,
1 Description:
The Fiber Meter is mainly used for checking the signal output power of the optical communication equipment in fiber optic networks. It measures the average power of a continuous light beam which emits from the equipments or other optic sources. It measures power in both 850 nm / 1300 nm (Multimode) and 1310 nm / 1490 nm / 1550 nm (Singlemode) respectively.
The Fiber Meter consists of a solid state InGaAs photo diode, signal power measurement circuitry, and a 2 Digit s / 3 Digits LED display. Users just connect a fiber cable between the transmission port of the equipment and the universal interface on the Fiber Meter. (Or connect to other light source) The product will show the exact amount of the received power value (in dBm).
The universal connector can be used for all the most common fiber interfaces such as ST / SC / FC and it is suitable to test both Singlemode and Multimode cables. With an optical 2.5 mm to 1.25 mm adapter, users can even test for 1.25 mm fiber interface.
2. Features:
Robust & handy design with LED digits reading.
Easy to check Multimode 850 nm / 1300 nm output power.
Easy to check Singlemode 1310 nm / 1490 nm / 1550 nm output power.
Universal 2.5 mm to 1.25 mm adaptor for SC / ST / FC to LC or MU
關鍵詞：Fiber,Fibre,RoHS,SFP,SFP+,laser,power,supply,
Description
The F434S27457-D21 of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated single data link over single mode optical fiber. The high-speed laser diode and photo diode are provided as a light source and a detector, respectively. An EEPROM contained the detailed product information and digital diagnostics function for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFP MSA, SONET/SDH standards, Class 1 laser products, EN60825, and EN60950.
Features
RoHA Compliant
Operation Temperature: -20~85℃
1570nm uncooled DFB LD
1510nm receiver
With DDM Function
Hot Pluggable
Metal enclosure, low EMI
關鍵詞：Checker,Fiber,Optical,SFP,SFP+,Tools,光纖檢測器,
1 Description:
The Fiber Checker is a very useful tool designed for checking the defects of a fiber cable. It emits a visible 635 nm or 650 nm wavelength red laser light through fiber optic cables, then if there are breaks or defects in the fiber will refract the light, creating a bright glow around the faulty area.
The universal connector can be used for all the most widespread fiber interfaces such as ST / SC / FC connector. It is suitable to test both Singlemode and Multimode cables. With an optional 2.5 mm to 1.25 mm optional Adapter, you can easily test 1.25 mm diameter fiber LC or MU connector. The visibility is up to 3 Km to 5 km depends upon the output power of the Fiber Checker.
Internally there is also a specifically designed power circuit APC ( Auto Power Control ) circuit provides steady power which avoids unstable laser output when the battery is low.TheLD output signal can be switched on CW or Pulse Mode to obtain different visual effects. There is a dust proof cover which will prevent dust from getting into the inside of the LD connector. The cover also helps you to avoid evading incidental exposure of the laser directly into your eyes.
2 Features:
Easy to check fiber faults by using 635 nm or 650 nm visual red laser
Range: visibility up to 3 ~ 5 Km
關鍵詞：Fiber,Fibre,SFP,SFP+,ethernet,power,rohs,supply,
Description
The F431S17431 of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated single data link over single mode optical fiber. The high-speed laser diode and photo diode are provided as a light source and a detector, respectively. An EEPROM contained the detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFP MSA, SONET/SDH standards, Class 1 laser products, EN60825, and EN60950.
Feartures:
RoHS Compliant
Operation Temperature: 0~70℃
1310nm uncooled FPLD
1550 receiver
20km link distance
